www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
Please Note: This page is displayed in a NEW Browser Window
Close this Window when you are done to return the Previous Page.
NEW HWACHEON HI-TECH MODEL 200B CNC LATHE
WITH FANUC OiTC CONTROL, 10" CHUCK
NW-17394
S/N M015355-A2FK
SPECIFICATIONS:
CAPACITY
SWING OVER BED: 19.7"
MAXIMUM TURNING DIA: 13.8"
MAXIMUM TURNING LENGTH: 15.7"
CHUCK SIZE: 10"
BAR DIAMETER: 2.50"
SPINDLE
SPINDLE NOSE: A2-6
SPINDLE BORE: 2.95"
SPINDLE SPEED: 30 – 3,500 RPM
SPINDLE HORSEPOWER (CONT/30 MIN.): 15/20 (AC)
TURRET
SERVO INDEX MOTOR/ NON LIFT CURVIC COUPLING: DRUM
NUMBER OF STATIONS: 12
INDEX TIME: 0.2 SECONDS PER STATION
TOOL SIZE
TURNING & FACING: 1" X 1"
BORING BAR MAXIMUM DIAMETER: 1.25"
RAPID TRAVERSE RATE OF X-AXIS: 1,181 IPM
RAPID TRAVERSE RATE OF Z-AXIS: 1,181 IPM
FEED RATE: 0.04 – 157 IPM
AXIS TRAVEL
X-AXIS: 7.7"
Z-AXIS: 16.9"
POSITIONING ACCURACY OF X-AXIS: 0.0002" / 4"
POSITIONING ACCURACY OF Z-AXIS: 0.0003" / 12"
REPEATABILITY OF X-AXIS: ± 0.00007"
REPEATABILITY OF Z-AXIS: ± 0.0001"
MACHINE DIMENSIONS
FLOOR SPACE (L X W): 103.3" X 65.3"
HEIGHT: 67.9"
TOTAL POWER REQ'D. (220V) 30 KVA: 60 AMPS
WEIGHT: 9,350 LBS.
TURRET TOOLING
FIVE (5) BORING BAR HOLDERS
ONE (1) FACE HOLDER
FIVE (5) BORING BAR SLEEVES
THREE (3) DRILL SOCKETS
STANDARD FEATURES
FANUC OiTC
HYDRAULIC UNIT
DOOR INTERLOCK
STAND WORKLIGHT
SLANT BED DESIGN
COMPLETE COOLANT SYSTEM
CHIP AND COOLANT SPLASH GUARDING SEPARATE FROM BED CASTING
12 STATION TURRET WITH SERVO INDEX / NON LIFT CURVIC COUPLING
ID/OD IN ANY POSITION ON TURRET
HYDRAULIC TAILSTOCK WITH PROGRAMMABLE QUILL
FOOT SWITCH FOR HYDRAULIC CHUCK
ONE (1) SET OF ADJUSTING TOOLS
HARDENED AND GROUND SLIDE WAYS WITH TURCITE COATING
10" DIAMETER HYDRAULIC THRU-HOLE POWER CHUCK WITH ONE SET OF SOFT JAWS
? BORING BAR HOLDERS, FACE HOLDER, BORING BAR SLEEVES, DRILL SOCKETS
? MANUALS: PROGRAMMING, OPERATING, TOOLING, MAINTENANCE
PRICE $ 65,000.00
INCOMING FREIGHT $ 2,000.00
$ 67,000.00
SPECIAL PRICE $ 61,500.00
INCOMING FREIGHT $ 2,000.00
$ 63,500.00
REQUEST STOCK NUMBER
NW-17394
Get PreApproved Financing from Direct Capital Leasing !
Apply online
Download an Application Today !
Check your Payment with the DCC On-Line Leasing Calculator
Compound Interest Calculator
DISCLAIMER: The information presented in this write up and the Photographic representation of this equipment is believed
to be accurate at the time of this writing.
This by no means should be used for formal quotation. Price and Information presented in this write-up are subject to change without notice.
Please contact one of our sales representatives if you require more
information or a formal quotation.
Request information on NW-17394 via E-mail
Send a link to this page to someone via E-mail
www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
This Web Site, all text and images contained herein are owned by and are copyright © 1996 - 2009 Action Machinery Co., Inc.
None of the contents of this site may be reproduced or republished with out written permission from Action Machinery Co., Inc.
This Site Developed and Maintained by:
George H. Patterson
I welcome any and all Comments and Suggestions
This Page was Created 01-07-2011 at 11:42:37