www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
Please Note: This page is displayed in a NEW Browser Window
Close this Window when you are done to return the Previous Page.
USED HARDINGE CONQUEST ST225B CNC SWISS STYLE LATHE,
1" CAPACITY, WITH GE FANUC 18iT CONTROL & 12' LNS EXPRESS
226 MAGAZINE BARFEED
PG-17721#
S/N 220-25
NEW 2000
SPECIFICATIONS:
SPINDLE
COLLET STYLE: S25-HM
BAR CAPACITY WITH COLLET
(MAX.)(GROUND BAR STOCK REQUIRED): 1"
MACHINING LENGTH – SINGLE CHUCK (MAX.): 9.65"
MAIN SPINDLE SPEED: 250 TO 8000 RPM
MAIN SPINDLE DRIVE: 7.3 HP
MAIN SPINDLE COOLING: LIQUID
MAIN SPINDLE INDEXING INCREMENTS: 5 DEGREE
AXES
NUMBER OF AXES: 6 (INCLUDES C-AXIS)
AXIS TRAVELS: X1 – 2.75"
Y1- 7.50"
Z1 – ONE CHUCKING – 9.65"
Y2- 9.00"
Z2 – 8.50"
AXIS SPEEDS: X – 472 IPM
Y1 AND Y2 – 630 IPM
Z1 AND Z2 – 787 IPM
TOOLING
SQUARE SHANK TOOL SIZE: 5/8"
NUMBER ON FRONT TOOL SLIDE
WITH TRIPLE LIVE TOOLING OPTION: 2 + TRIPLE LIVE TOOL
NUMBER ON REAR TOOL SLIDE: 6
(NUMBER) AND SIZE OF ROUND SHANK TOOLS
TYPE B – FRONT END WORKING: (4) 1"
TYPE B – BACK END WORKING: (4) 5/8"
TOOL SHANK DIAMETER WITH COLLET (STYLE)
FRONT & BACK END WORKING: .04" TO .50"
SUB-SPINDLE
COLLET STYLE: S25-HS
SPEED RANGE: 200 TO 8000 RPM
DRIVE SYSTEM: 3.0 HP
INDEXING INCREMENTS (OPTIONAL): 5 DEGREE
ROUND SHANK TOOL SIZE: 1"
NUMBER OF TOOLS FOR FRONT-END WORKING
(WITH LIVE TOOL MILL/DRILL OPTION): 3 + 1 LIVE
LIVE TOOLING
NUMBER OF LIVE TOOLS
FOR CROSS WORKING: 3
FOR MILL/DRILL UNIT (SUB-SPINDLE): 1
SPEED RANGE
CROSS WORKING: 250 TO 6000 RPM
MILL/DRILL UNIT (SUB-SPINDLE): 200 TO 8000 RPM
RATED MOTOR POWER
CROSS WORKING: 1.9 HP
MILL/DRILL UNIT (SUB-SPINDLE): 3.0 HP
TOOL SHANK DIAMETER WITH COLLET (STYLE)
CROSS WORKING: .04 TO .50"
MILL/DRILL UNIT (SUB-SPINDLE): .04 TO .50"
MACHINE DIMENSIONS AND WEIGHT
MACHINE DIMENSIONS
LENGTH WITHOUT BARFEED: 96.7"
ADDITIONAL LENGTH FOR CHIP SYSTEM: 54"
DEPTH: 54.7"
HEIGHT: 63.7"
ADDITIONAL HEIGHT FOR TRIPLE LIGHT TOWER: 14"
WEIGHT, APPROX.: 7,500 LBS
ELECTRICS: 220 VOLTS, 3 PH, 60 CYC
EQUIPPED WITH:
FANUC 18iT CONTROL
LNS EXPRESS 226 BARFEED
LIVE TOOLING
C-AXIS CONTOURING
5 DEG. SPINDLE ORIENT
SUB-SPINDLE EJECTOR – SPRING TYPE
OFF CENTER MILL/DRILL UNIT (INCH)
AIR BLAST (X-AXIS FRONT & REAR)
AIR BLAST FOR SUB-SPINDLE (B AXIS)
PARTS CATCHER #1 CHUTE TYPE
PARTS CATCHER #3 OUTSIDE
BARFEED INTERFACE (MAGAZINE)
CHIP REMOVAL
OPTICAL CUT-OFF DETECTOR
MANUAL PULSE GENERATOR
NON-ROUND BAR STOCK
PRICE $ 66,500.00
NOTE: SINCE WE ARE ACTING AS A BROKER ON THIS MACHINE, IT IS BEING SOLD "AS IS"
MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.
THERE WILL BE AN ADDITIONAL CHARGE FOR MACHINE PREPARATION AND LOADING.
REQUEST STOCK NUMBER
PG-17721#
Get PreApproved Financing from Direct Capital Leasing !
Apply online
Download an Application Today !
Check your Payment with the DCC On-Line Leasing Calculator
Compound Interest Calculator
DISCLAIMER: The information presented in this write up and the Photographic representation of this equipment is believed
to be accurate at the time of this writing.
This by no means should be used for formal quotation. Price and Information presented in this write-up are subject to change without notice.
Please contact one of our sales representatives if you require more
information or a formal quotation.
Request information on PG-17721# via E-mail
Send a link to this page to someone via E-mail
www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
This Web Site, all text and images contained herein are owned by and are copyright © 1996 - 2009 Action Machinery Co., Inc.
None of the contents of this site may be reproduced or republished with out written permission from Action Machinery Co., Inc.
This Site Developed and Maintained by:
George H. Patterson
I welcome any and all Comments and Suggestions
This Page was Created 09-08-2010 at 09:51:47