www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
Please Note: This page is displayed in a NEW Browser Window
Close this Window when you are done to return the Previous Page.
USED HARDINGE MODEL HLV-H-EM INCH/METRIC
TOOLROOM LATHE, 11" X 18"
DK-18091
S/N HLVH-12659T
NEW 1986
SPECIFICATIONS:
SPINDLE CAPACITY, WITH ROUND 5C COLLETS: 1-1/16"
SPINDLE NOSE: 5C HARDINGE TAPER NOSE
VARIABLE SPINDLE SPEEDS: 125 TO 3000 RPM
MAIN SPINDLE MOTOR (2-SPEED): 1/2 - 1 HP
SWING OVER BED: 11"
SWING OVER CARRIAGE: 9"
SWING OVER CROSS SLIDE: 6"
DISTANCE BETWEEN CENTERS: 18"
HOLE THROUGH SPINDLE: 1-1/4"
SPINDLE CENTER CONCENTRICITY: .0002
COMPOUND SLIDE TRAVEL: 3"
CARRIAGE POWER FEED RANGE: 5/16 TO 7 IPM
CROSS SLIDE POWER FEED RANGE: 3/16 TO 4 IPM
SIZE OF LATHE TOOL
WEDGE-TYPE: 3/8" X 3/8"
ROCKER-TYPE: 3/8" X 1"
TAILSTOCK SPINDLE DIAMETER: 1-3/8"
TAILSTOCK SPINDLE TRAVEL: 3-3/4"
TAILSTOCK SPINDLE TAPER: NO. 2 MORSE TAPER
TAILSTOCK ALIGNMENT - VERT & HORZ: .0005
TOOL SLIDE GIB W/FULL DOVETAIL BEARING: .0005
CROSS SLIDE GIB W/FULL DOVETAIL BEARING: .0005
TRAVEL OF CROSS SLIDE: 5-1/2"
LEADSCREW DIAMETER: 1" - 8 THREAD
LEADSCREW ALIGNED W/BED AT ENDS - VERT & HORZ.: .001
RANGE OF THREADS IN GEARBOX: 11 TO 108
NUMBER OF THREAD CHANGES IN GEAR BOX: 27
THREADS CUT THROUGH GEARBOX: 11, 11.5, 12, 13, 14, 15, 16, 17.5, 18, 20,
22, 23, 24, 25, 26, 27, 28, 30, 32, 35, 36,
40, 44, 46, 48, 50, 52, 54, 56, 60, 64,
70, 72, 80, 100, 108 TPI
PITCHES PER MILLIMETER: .4375, .2875, .875, .625, .575, .375, .325, .275, .75, .65, .55, .45, .35, .9, .8, .7, .6, .5, .4, .3, 1, 1.15, 1.25, 1.35, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.75, 1.8, 2, 2.5, 2.7
DIMENSIONS (APPROX.)
LENGTH WITH DOORS OPEN: 96"
LENGTH WITH DOORS CLOSED: 68-3/4"
DEPTH: 28"
MACHINE WEIGHT: 2250 LBS.
ELECTRICS: 230V, 3 PH, 60 CYC
EQUIPPED WITH:
ACU-RITE III 2-AXIS DIGITAL READOUT
6" 3-JAW CHUCK
6" 6-JAW CHUCK
6" 4-JAW CHUCK
TAPER ATTACHMENT
LEVER OPERATED COLLET CLOSER
IVERSON 4-POSITION DRUM STOP
HARDINGE QUICK CHANGE TOOLPOST WITH EIGHT HOLDERS
HARDINGE 4-POST INDEXABLE TURRET
MISCELLANEOUS COLLETS, CENTERS
PRICE $ 27,500.00
REQUEST STOCK NUMBER
DK-18091
Get PreApproved Financing from Direct Capital Leasing !
Apply online
Download an Application Today !
Check your Payment with the DCC On-Line Leasing Calculator
Compound Interest Calculator
DISCLAIMER: The information presented in this write up and the Photographic representation of this equipment is believed
to be accurate at the time of this writing.
This by no means should be used for formal quotation. Price and Information presented in this write-up are subject to change without notice.
Please contact one of our sales representatives if you require more
information or a formal quotation.
Request information on DK-18091 via E-mail
Send a link to this page to someone via E-mail
www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
This Web Site, all text and images contained herein are owned by and are copyright © 1996 - 2009 Action Machinery Co., Inc.
None of the contents of this site may be reproduced or republished with out written permission from Action Machinery Co., Inc.
This Site Developed and Maintained by:
George H. Patterson
I welcome any and all Comments and Suggestions
This Page was Created 11-12-2009 at 10:26:15