www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
Please Note: This page is displayed in a NEW Browser Window
Close this Window when you are done to return the Previous Page.
USED MAZAK SPACE GEAR 48/2500 MARK II 6-AXIS LASER
WITH MAZAK/FANUC 160iLB CONTROL, 4' X 8'
DK-18302#*
S/N 184505
NEW 2005 (INSTALLED IN 2006)
ONLY 4,353 RESONATOR ON HOURS
LAST SERVICE BY PANASONIC AT 3,398 HOURS
SPECIFICATIONS
LASER CONTINUOUS RATED OUTPUT: 2,500 W
MAX. WORKPIECE (FLAT SHEET): 49" X 98"
MAX. WORKPIECE (CUBIC SHEET): 48" X 35" X 11"
MAX. LOAD CAPACITY: 1,210 LBS
MAX. CUTTING THICKNESS (MILD STEEL): .75"
X-AXIS STROKE: 109"
Y-AXIS STROKE: 50"
Z-AXIS STROKE: 16.5"
A-AXIS (HEAD): ± 345°
B-AXIS (HEAD): ± 135°
C-AXIS (CHUCK): ± 360°
RAPID TRAVERSE RATE
X, Y, Z AXIS: 945 IPM
A-AXIS: 9,600 DEG/MIN
B-AXIS: 9,600 DEG/MIN
C-AXIS: 2,000 DEG/MIN
CUTTING FEED RATE (X, Y, Z): 590 IPM
ELECTRICS: WILL ADVISE
EQUIPPED WITH
MAZAK/FANUC 160iLB CONTROL (MAZAK & FANUC L-64)
2500 LASER TYPE 8, S/N 5645
TABLE FOR ROTARY AXIS
11" 4-JAW CHUCK WITH 6-1/2" THRU HOLE
ORION RKL9000D CHILLER
SLUG CONVEYOR
TRANSFORMER
UNIVERSAL LASER FOR 2D, 3D PLUS PIPE AND STRUCTURAL FABRICATING
PRICE $ 218,250.00
NOTE: SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A LESSOR
AND IS A REPOSSESSED MACHINE IT IS BEING SOLD "AS IS" BUT
CAN BE THOROUGHLY INSPECTED AT OUR BETHLEHEM, PA
FACILITY. A VIDEO OF THE MACHINE UNDER POWER Is
AVAILABLE.
MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK
MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS
MACHINE.
THERE WILL BE AN ADDITIONAL CHARGE FOR MACHINE
PREPARATION AND LOADING.
IT IS THE BUYERS RESPONSIBILITY TO CONFIRM THE PRESENCE,
FUNCTIONALITY, AND LICENSING REQUIREMENTS OF THE
SOFTWARE
REQUEST STOCK NUMBER
DK-18302#
Get PreApproved Financing from Direct Capital Leasing !
Apply online
Download an Application Today !
Check your Payment with the DCC On-Line Leasing Calculator
Compound Interest Calculator
DISCLAIMER: The information presented in this write up and the Photographic representation of this equipment is believed
to be accurate at the time of this writing.
This by no means should be used for formal quotation. Price and Information presented in this write-up are subject to change without notice.
Please contact one of our sales representatives if you require more
information or a formal quotation.
Request information on DK-18302# via E-mail
Send a link to this page to someone via E-mail
www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
This Web Site, all text and images contained herein are owned by and are copyright © 1996 - 2009 Action Machinery Co., Inc.
None of the contents of this site may be reproduced or republished with out written permission from Action Machinery Co., Inc.
This Site Developed and Maintained by:
George H. Patterson
I welcome any and all Comments and Suggestions
This Page was Created 11-18-2009 at 12:15:21