www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
Please Note: This page is displayed in a NEW Browser Window
Close this Window when you are done to return the Previous Page.
USED FRYER MODEL ET-18 CNC LATHE, 21" X 40",
WITH FRYER TOUCH 2000 CNC CONTROL
DK-17946#
S/N 18176
NEW 2004
SPECIFICATIONS
CAPACITY
SWING OVER BED: 21"
CENTER HEIGHT: 9.5"
DISTANCE BETWEEN CENTERS: 40"
WIDTH OF BED: 14"
WIDTH OF CROSS SLIDE: 8.5"
TRAVELS
X-AXIS: 10"
Z-AXIS: 37"
BALL SCREW SIZE: 1.625" Z – 1.00" X
SPINDLE
SPINDLE NOSE: CAMLOCK D1-6
SPINDLE BORE: 2.05"
SPINDLE NOSE TAPER: MT #6
SPINDLE MOTOR: 10 HP (PEAK)
SPINDLE SPEED: 50 – 2,500 RPM
SPEED RANGE
LOW: 50 – 250 RPM
HIGH: 100 – 2,500 RPM
SPEED SELECTION: AUTO
TAILSTOCK
QUILL TRAVEL: 5.0"
QUILL DIAMETER: 2.5"
QUILL TAPER HOLE: MT #4
PERFORMANCE
RESOLUTION: ± 0.00010"
RAPID TRAVERSE (X,Z): 400 IPM
SERVO TYPE: AC DIGITAL BRUSHLESS
AXIS THRUST, PEAK
X-AXIS: 3,058 LBS
Z-AXIS: 3,504 LBS
GENERAL INFORMATION
AIR PRESSURE REQUIREMENTS: 90 PSI – 5 CFM
COOLANT CAPACITY: 10 GAL.
COOLANT FLOW: 2 GPM
POWER REQUIREMENTS: 40 AMP
SHIPPING DIMENSIONS: 86" W X 72" D X 68" H
OPERATING DIMENSIONS: 86" W X 74" D X 68" H
MACHINE WEIGHT: 6,500 LBS
ELECTRICS: 220V, 3 PH, 60 CYCLE
CAN BE: 208V-230V, 3 PH, 60 CYCLE
EQUIPPED WITH:
FRYER TOUCH 2000 CNC CONTROL
12" 3-JAW MANUAL CHUCK
DORIAN QUICK CHANGE TOOLPOST WITH ASSORTED HOLDERS
STEADY REST
NOTE: THIS IS AN 18" LATHE WITH 1.5" FACTORY RISERS
PRICE $ 24,500.00
NOTE: SINCE THIS MACHINE IS BEING SOLD ON BEHALF OF A LESSOR AND IS A REPOSSESSED MACHINE IT IS BEING SOLD "AS IS" BUT CAN BE THOROUGHLY INSPECTED UNDER POWER AT OUR BETHLEHEM, PA FACILITY.
MUST BE PAID WITH GUARANTEED FUNDS OR COMPANY CHECK MUST CLEAR BANK ACCOUNT BEFORE RELEASE OF THIS MACHINE.
THERE WILL BE AN ADDITIONAL CHARGE FOR MACHINE PREPARATION AND LOADING.
REQUEST STOCK NUMBER
DK-17946#
7.4% 90 Day Deferred Financing from De Lage Landen Leasing !
Download an Application Today !
Check your Payment with the DLL On-Line Leasing Calculator
Compound Interest Calculator
DISCLAIMER: The information presented in this write up and the Photographic representation of this equipment is believed
to be accurate at the time of this writing.
This by no means should be used for formal quotation. Price and Information presented in this write-up are subject to change without notice.
Please contact one of our sales representatives if you require more
information or a formal quotation.
Request information on DK-17946# via E-mail
Send a link to this page to someone via E-mail
www.actionmachinery.com
Action Machinery Co., Inc. Bethlehem Pa. Phone (610) 691-6677 Fax (610) 694-0944
This Web Site, all text and images contained herein are owned by and are copyright © 1996 - 2006 Action Machinery Co., Inc.
None of the contents of this site may be reproduced or republished with out written permission from Action Machinery Co., Inc.
This Site Developed and Maintained by:
George H. Patterson
I welcome any and all Comments and Suggestions
This Page was Created 08-01-2008 at 11:38:12